DocuPen RC800 Manual do Utilizador descarregar pdf (Página 13)

DocuPen Roller Calibration Procedure

If your scanned image looks disproportionally stretched (or shrunk) then you need to

calibrate the rollers.

As a rule, color calibration must be done first, before roller calibration

1. Open the DocuPen Scanner Control window.

Click on

Options and select Calibration.

2. In the Calibration

Dialog

window that

appears click on the

Auto

button

3. In the Calibration Setup window that

appears please

Calibrate Roller and click on

OK.

4. You will be prompted to turn the DocuPen ON. Press the

Power On button on your

DocuPen and Click

OK in the Dialog window.

Note: Your DocuPen memory will be ERASED!

DocuPen Operation Manual 24

DocuPen Roller Calibration Procedure

After the memory has been erased the Calibration scanning window will appear.

5. Turn the DocuPen On and scan the

Roller Calibration sheet. For optimal results

we recommend to perform the Roller Calibration in Mono Mode B/W 1 bit by Resolution

200dpi.

6. After the calibration image is saved into DocuPen’s memory, click

OK in the

Calibration scanning window. Make sure that the DocuPen is turned ON.

If the accuracy is within 96-104%,you have successfully calibrated the roller!

7. Finally, click Upload Values button in the Calibration result window to send the

calibration result to the DocuPen. Turn ON the scanner and click

OK.

DocuPen Operation Manual 25

1 2 ... 8 9 10 11 12 13 14 15

Sem comentários

DocuPen RC800 Manual do Utilizador Página 13